BowFishing Country banner
81 - 100 of 370 Posts
What is the size of the 100w???
this:

Parameter:
[Name]: super bright white spot light 100W
[input]: AC85V-265V
[Brightness]: 10000LM
[power]: 100W (single integrated 100W)]
[LED light color: can be customized are white, red, blue, green, yellow, warm white color
【Dimension】: 370 * 285 * 120mm
【 light angle】: 140 °
[color rendering index: Ra> 85
[level protection]: IP65
[material]: die-casting aluminum lamp body, ultra-white glass face cover, spray the surface of silver
[control]: built-in constant current drive of high-quality effects
[color: monochrome projection
[ambient temperature]: -30 ℃ ~ 50
[NW]: 5.8KG
 
The MH are 14000 each if the divinelighting chart is correct that OBG posted in a previous thread. Therefore this is 6x14000 which is 84000. I was referring to the 50W at max output of 5500LM, so that would be 15x5500 which is 82500 which is slightly less than the MH.
Leds are directional so to be a fair comparison of delivered lumens multiply the led's lumen output X 3. If the 50 watt leds put out 5,000 lumens one will be brighter than a 175 watt M/H.
 
no the 50w led's are 5000-5500 lumens so if your runnin 14000 lumens then you could run 3 of these 50w LED's and surpass the 14000 lumens if I understood customfitz originally post correctly
Not. One 50 watt led should be slightly brighter than a 175 m/h.
 
81 - 100 of 370 Posts