BowFishing Country banner

1 - 14 of 14 Posts

·
Registered
Joined
·
482 Posts
I think the 600lb is way overkill. Most I have seen use a 250lbish and 12'' stroke. I don't think you will have enough turn radius with 6'' stroke depending on your setup.
 

·
Registered
Joined
·
501 Posts
I got a 1,000lb Rated 12" travel actuator. 1 inch per second travel for my fan boat. I didn't want it to break lol

IMG_5664.JPG
 

·
Registered
Joined
·
118 Posts
The 180 each way comes with the sprocket ratio to lent travel of actuator. I have a 16 tooth sprocket on the motor and a 60 tooth sprocket on the actuator.
 

·
Registered
Joined
·
1,715 Posts
Warner Linear Actuator K2G05-12V-BR-06 B Track K2 6" is the actuator I used plus the 16 tooth and 60 tooth sprockets like PSE Bowfisher above.
 

·
Registered
Joined
·
1,879 Posts
Will this actuator work for a 35hp vanguard with 58-60in 3 blade prop ? If not any suggestion on which one to go with ?
same one as HA2 for a 35hp vanguard with 55" 4 blade F prop on a rack n pinion style steering
 
1 - 14 of 14 Posts
Top