In need of some help. I'm building a new boat and I'm thinking of using LED lights both under water and above, was wondering if anyone has used them yet. Would appreciate pics and input. Thanks!!!
I'm sure they are close to the spec's they advertise so that wouldn't be an issue. At $50 each should be a good deal though.i can tell you know your chit! kskiller may want to get one and check, boat fire is bad jew jew...lol
you ever see a battery explode? not fun especially when its next to you!They work and they put out some crazy amounts of light. Who really cares about all the numbers. Heck, I would use a bon fire on the front of my boat if it put off enough light.
O yeah I have, to many times.you ever see a battery explode? not fun especially when its next to you!
I agree! I started off with 4 350 watt ultras and shot plenty of fish! You wouldnt have to worry about genny reliability, cost of gas for genny, initial cost of genny, and the noise!They work and they put out some crazy amounts of light. Who really cares about all the numbers. Heck, I would use a bon fire on the front of my boat if it put off enough light.
The numbers determine how log you can fish on a charge, how many lights you can have on your batteries, how many batteries it takes to fish all night etc so yes most people care about the numbers.They work and they put out some crazy amounts of light. Who really cares about all the numbers. Heck, I would use a bon fire on the front of my boat if it put off enough light.
I think he may have referred to the lumens numbers? As long as the last around 7-8 hours Im down!The numbers determine how log you can fish on a charge, how many lights you can have on your batteries, how many batteries it takes to fish all night etc so yes most people care about the numbers.
NO, these are a 12/24 volt lightSo these aren't the same ones listed here earlier? I thought they ran on 120V.
I personally would still run a generator since I run a fan. But the genny would still be loafing compared to running the halos.
If they are fairly bright and you can run 10 of them all night on 4 batteries or less they should work well for bowfishing.O I know OBG, just tryin to lighten the mood. I have checked out Kskillers lights and all the specs and did my own research on the lights too. I am going to use the LED lights myself. When I use the lights there will be enough batteries to push the lights and safely.
I am looking at them (the 120v) very hard. Trying to work with an American company but not getting much luck in getting return calls. But...I planned on running 2 Eu2000's, these would keep me at running just one.So these aren't the same ones listed here earlier? I thought they ran on 120V.
I personally would still run a generator since I run a fan. But the genny would still be loafing compared to running the halos.
Drivers are in the 95-98% efficient range. I would say yes they are using 9 "3 watt" LEDs, but since LED are variable current driven, not voltage driven like Incandescent/HID, they label them as 27 watt but in this application the driver current applied is under the LEDs max rating giving a lower Amp draw and a lower actually usage(watts). There are LEDs now putting out over 200 lumens/watt, tech is advancing 2fold about every year, so it really makes using watts as a comparison factor irrelevant.That's what the driver does and loses some electricity in the process. A true 27 watt LED light will use slightly more than 27 watts total input including the driver---never 16 watts as spec'ed on these. Look at the specs on some of the LED's from the major companies here---a 56 watt LED light normally uses around 66 watts total input from the power supply. Possibly they are using [9] 3 watt led's-27 watts- and only driving them to 16 watts?
Then they should be listed a a 16 watt LED light fixture.Drivers are in the 95-98% efficient range. I would say yes they are using 9 "3 watt" LEDs, but since LED are variable current driven, not voltage driven like Incandescent/HID, they label them as 27 watt but in this application the driver current applied is under the LEDs max rating giving a lower Amp draw and a lower actually usage(watts). There are LEDs now putting out over 200 lumens/watt, tech is advancing 2fold about every year, so it really makes using watts as a comparison factor irrelevant.
Very very true, but would they sell as many that way?:tu:Then they should be listed a a 16 watt LED light fixture.