[574yellowlab]

I am looking for a good rest on my black eagle. I currently use the rpm victory on all my other bows. I tie to the back and I get tired of fumbling arround with the rubber keeper on the quick shot rests. I would prefer a shelf rest like full bore or fan man, but I don't think either makes one for a BE. So what do you guys use ?

 

[American Eagle]

Have you tried using the Quick Draw without the rubber piece?

 

[WILDCARD]

The New Muzzy MANTIS is SWEET I saw it at the ATA show

 

[GaryBriggs]

3d printed for my BE


Epoxy on my BE

 

[chance]

Try the muzzy fishhook I like to be able to just throw my arrow on my rest and not have to find a groove or a slot on the side of a rest

 

[Fullbore]

Id recommend a QuickDraw also, pretty much bullet proof

 

[water snake 2]

Id recommend a QuickDraw also, pretty much bullet proof

bullet rest!!

 

[BOWFISH 24/7]

Hey 574yellowlab !
Attached is a photo sent to me from Scott Estes of a shrinkwrap mod of a QD rest.
Never tried it ( I shoot slides) But he love it . PM Scott , I'm sure he want mind sharing this info with you .

 

[Delawareriver]

Epoxy or a 3d printed shelf rests is what I use

 

[whiteriverrambo]

wow, Bill. that's a great idea.

 

[574yellowlab]

Thanks for the input guys

 

[crfishhunter]

I don't see the advantage of shrink wrapping the gate at all. If you where going to go that far you might as well have a solid loop on the rest.

 

[crfishhunter]

574yellowlab what are you fumbling with on the qd rest. Do you slide the arrow and line through the gate or load it from the end. I always slide mine through from the front and I also tie to the back. Only issue I ever have is once in a while a loop will catch on the back side of the rest. But that's going to happen to anyone that ties to the back. Keep your drag on the light side and adjust accordingly.

 

[574yellowlab]

Yea the rubber keeper was always messing with me. So I Started Shooting the Victory rest.. I guess I figured there was something better out there by now

 

[crfishhunter]

Not to jack your thread but did that BE show up on time to skippy?

 

[maglite]

Www.quickdrawoutdoorgear.com
Quick Draw is the only way to go!

 

[maglite]

I'm trying to get Bill @ Quickdraw to make a fully enclosed Quickdraw rest!

 

[Delawareriver]

574yellowlab what are you fumbling with on the qd rest. Do you slide the arrow and line through the gate or load it from the end. I always slide mine through from the front and I also tie to the back. Only issue I ever have is once in a while a loop will catch on the back side of the rest. But that's going to happen to anyone that ties to the back. Keep your drag on the light side and adjust accordingly.

Yep good rest but It would catch on the back of the rest 5 or 6 times a night and on the gate maybe once a night. Never bothered me till it happened while shooting at 60+lb possible state record grassie. Switched over to shelf rests and line never gets caught on anything anymore

 

[Skippy]

Not to jack your thread but did that BE show up on time to skippy?

Yes got it, good looking bow��

 

[buck25]

Quick draw with out the rubber gauge