Honda EU3000 shutting down while getting on plane.

CARPDIGGER · May 19, 2014

Anybody else have problems with there Honda's when the boat is at a higher angle?

Has anyone removed a sensor or anything to avoid this? :headbang:

g-devil · May 19, 2014

it have plenty of oil in it?

WBG444 · May 19, 2014

Over fill the oil just a little.

Hacksaw · May 19, 2014

X2 i do it to all my gennys so they run on angles

JTate · May 19, 2014

Oil sensor sounds like.

vlrlex1 · May 19, 2014

My eu3000 did the same thing. Overfill just a touch and mine stopped. Should solve ya prob.

garpwacker · May 20, 2014

Try turning the gennie so when on plane oil runs towards the sensor and not away from it

ROYCE1967 · May 20, 2014

Yep...had the same prob....lifted the jenny on angle and put a little xtra oil in it...

huntingnut · May 20, 2014

As stated just put a little extra oil in it

WBG444 · May 20, 2014

Did anyone recommend adding about 4-6 extra oz of oil to it?

CARPDIGGER · May 20, 2014

Thats agreat idea!!

warrior-p · May 21, 2014

when was the last time you changed the oil in it? As the oil begins to break down, I have seen this happen

CARPDIGGER · Jul 23, 2014

I added some oil as suggested, still had problems. I located the low oil sensor wire and unhooked it. Problem solved.