Well got the roof done so im back to the lathe and got a point started. There will be flutes cut in but i wanted to hear your opinions on the angle of this point before i cut them. This one here is 40 degrees Im trying to decide whether i should use this one or cut it down to 30 degrees. The 40 degree one will be tougher in rocky areas but the 30 will be pointier. What say you?
how are these, grapple edition
freekforge
1 - 1 of 59 Posts
Joined
·
1,880 Posts
30° i wouldn't see the need for both...
1 - 1 of 59 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
