BowFishing Country banner
1 - 15 of 15 Posts

· Electrocutioner
Joined
·
6,663 Posts
Can you run these lights without a inverter type genny.Thought in the old site it was said inverter was a must with hps .
Not everything you read is true. lol I think some people have had issues with hps lights flickering on some of the cheaper[Champion etc] gennys. Any quality genny that can maintain a stable current/voltage will run hps/mh lights just fine.
 

· Registered
Joined
·
274 Posts
The cleaner power you have the better your lights will run. However you don't NEED the invertor style generators to run HPS lights.
 

· Electrocutioner
Joined
·
6,663 Posts
OBG is there some sort of a inline inverter u could use if u have problems.
Probably but a good one would more than likely cost as much as a decent genny. lol
 

· Registered
Joined
·
1,083 Posts
OBG posted a couple of charts that show everything from lumens to amp wattage reguirements for a ton of different lights and all. Search for it and you should get a lot of good info. out of it.
 

· Electrocutioner
Joined
·
6,663 Posts
OBG posted a couple of charts that show everything from lumens to amp wattage reguirements for a ton of different lights and all. Search for it and you should get a lot of good info. out of it.
I think Mud posted the chart on the "Let's talk lights" thread.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top