BowFishing Country banner
1 - 20 of 107 Posts

hotrodderscott

· Registered
Joined
·
2,282 Posts
Discussion starter · #1 ·
Got my 50 watt models in............Problem!!!!!!!!!!!!!!!
NO wiring info!!!!!!!
I have:
1) BROWN
1) BLUE
1) YELLOW/ GREEN

Any advice????????
I dont want to just go hooking $hit up and burn something up!!!!!!!!!!!!!!!!!!!!
 
Discussion starter · #2 ·
the Brown and blue wires are stripped back 1 inch and dipped in silver solder
Green/Yellow is not stripped.
 
Discussion starter · #3 ·
Just for an extra kick in the nut, I took the cover off the back and the ballast says "input" 80-220 volts so I am ASSUMING they are NOT going to work on 12 volt!!!!
 
Just for an extra kick in the nut, I took the cover off the back and the ballast says "input" 80-220 volts so I am ASSUMING they are NOT going to work on 12 volt!!!!
Did you think they were D/C?
 
Discussion starter · #7 ·
Did you think they were D/C?
I asked and double checked several times with CUSTOMFITZ that they would run AC/DC
I explained exactly what how I want to run them to him.
so YES I wanted to run them on 12 Volt If I knew they would ONLY run A/C I would have went another way!!!
 
Discussion starter · #8 ·
Uh oh, I hope they are 12/24/36. I ordered mine thinking the same thing!

Post some pics of the wiring and inside the back box
They are NOT!!!!!!!!!!!!!!!!!
NO wiring to look at its a sealed Ballast inside!
 
90-265 volts A/C. That pretty much sums it up.
 
Discussion starter · #14 ·
That OBG I got that when I opened it up!!!! Any idea on what wire would be hot and what one neutral??? Obviously the green/yellow looks to be ground!
 
Discussion starter · #15 ·
Wife says I need to calm down, its only Money!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ya ok, $720 in money!
 
1 - 20 of 107 Posts