BowFishing Country banner

1 - 3 of 3 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter #1
hey guys im wanting to make some light rails have a few questions

1.what thickness of aluminum would you use

2. what size wire (16ga example) to run from lights to generator

3. how do you hide the wire behind the lights to keep it from laying in the bottom of light rail

thanks in advance any info will be appreciated
 

·
Premium Member
Joined
·
906 Posts
can't help on aluminum thickness you could message Barid Campbell of metal savvy and ask him he is on FB or Insta. as far as wire it depends on how many lights and the amps they pull and also distance from genny to light. General rule of thumb is go big then you dont have to worry about it. as far as hiding wires the make all kinds of loom holders that bolt /glue /stick to secure wires. i have used all three forms at one time or another
 

·
Registered
Joined
·
30 Posts
I use 1/8 5052 for light boxes. As far as hiding wires you could run round tubing on the outside edge and pull it through, use half pipe or angle or whatever to keep it hiddin
 
1 - 3 of 3 Posts
Top