BowFishing Country banner

1 - 8 of 8 Posts

·
Registered
Joined
·
227 Posts
Discussion Starter #1
I sold off my 12/24v 48w light rails, and picked up 9 viugreum 50w lights and a champion 2000w generator.

I had used 3/4" emt conduit for my previous light rail and bolted it to some spring clamps that clamped to my gunnel.

bow fishing.jpg


I'm trying to decide if I want to go with a similar setup with 1" emt and clamps or if I will need to go a different route due to the added weight of the bigger lights.

Any thoughts or ideas are appreciated.
 

·
Registered
Joined
·
227 Posts
Discussion Starter #2
I forgot to mention I now have a 2"x3" piece of angle bolted to the cast aluminum front piece with a transom mount troller off the right side of the bow. I'll try to remember to get an updated picture.
 

·
Registered
Joined
·
227 Posts
Discussion Starter #3
Well I finally got the duck blind off of the boat and picked up some of my materials.

I've got my extension cords pulled through conduit and will stay permanently in the boat. Bent my 1" emt to match the curve of the bow. I got my vertical pieces cut and notched.

Pics are of it mocked up, taking it over to a friends to weld.

rails1.jpg
rails2.jpg

I have 9 50w viugreums that will be going on the boat. 4 on each side and one mounted up front independently.
 
1 - 8 of 8 Posts
Top