[Hoopty]

Shooting it threw paper should tell you what to do pretty quick..Looks like the bottom limb needs to be backed off a lil..

 

[Skippy]

Did you use a level?

I used a bow square to set it up... my hydroglide sat in the exact same place.. this bow already shot perfect ... i dont get it...:headbang::headbang: feels like a :nk:

 

[Skippy]

Shooting it threw paper should tell you what to do pretty quick..Looks like the bottom limb needs to be backed off a lil..

the till is perfect...from cam to string on both limbs

 

[Hoopty]

Its crazy, everyone I have seen put on a bow is spot on...

 

[Skippy]

me too thats why i bought one!

 

[clark3]

I used a bow square first and mine did the same thing. I put a level on the arrow, and one on the string to be sure the bow was level and had to lower it 1/4" or so. I always use a bow square as well but couldn't get it to work. The level fixed all my problems.

 

[Skippy]

heres the thing i dont get ... i started at center, and raised the nock 1/8th inch at a time to almost half an inch and it shoots the same still......

 

[clark3]

Go down with it from center of your square that's what inhad to do

 

[Skippy]

I am going to go drink a beer and try it again... keep the ideas coming cause i cant figure this out.... never had a prob before ... its making me sick in my stomach!

 

[Skippy]

if i go down past center it screws it WAY up

 

[Hoopty]

The rest has a VERY LIL play in it on the bow, make sure it points to the front of the bow and not up..then move it up a 1inch and see what it does..

 

[Skippy]

ok made sure the rest is strait... reset my center and went up 1/4 inch and its not kicking the azz of the arrow up anymore.... now its going to the right every shot...maybe i am just a dumbazz.

 

[Hoopty]

I like mine out a lil- I put the washer in-behind the rest then put it on, puts the rest out about 1/16"..Works for me, I know IM the only one that has had to do that..

 

[Skippy]

I like mine out a lil- I put the washer in-behind the rest then put it on, puts the rest out about 1/16"..Works for me, I know IM the only one that has had to do that..

I got issues bad man lol ... now its azz up again... i have no clue... the washer thing might help me left and right... but the azz up thing is blowing my mind... even when i get it where i think it will work... i get 2 good shots then azz up on the next 10..... wtf????????????????

 

[Skippy]

I think i might try to put a different rest on it and see if i can get the bow to shoot strait... if not then i guess all my arrows could be bent ... all 4 i been using ..... not likely but at this point its this or start breaking stuff.... my stress level is at 100....

 

[Hoopty]

:cheers:op:

 

[Bad Company]

my arrows were doing back flips off my fanman. jeff and bubba both can shoot it dam good. thats when jeff pointed out that i gripped it like i was trying to strangle something loosened my grip and i stopped "torquing" my shots shootin perfect now!

 

[Skippy]

I just put the hydroglide back on and shooting bullets.............now what?

 

[Skippy]

my arrows were doing back flips off my fanman. jeff and bubba both can shoot it dam good. thats when jeff pointed out that i gripped it like i was trying to strangle something loosened my grip and i stopped "torquing" my shots shootin perfect now!

I thought that too but i shoot the same with 2 rests designed the same... one shoots bullets one doesnt....i am lost.

 

[M Colt]

In my honest opinion its the bows fault. That Osprey is a POS....lol