[matt33]

i just bought an oneida strike eagle 60-70lbs off of ebay for $110 and i was wondering how u go about getting the poundage lowered to like 25-45 and do they make modules for the strike eagles to where u can change the let off also

 

[Hoythntr96]

Talk to JOneida, You can send him your power limbs and he can sand them down to make them a lower weight range.

 

[GregNAlabama]

Or send it to Gulf Coast Archery and have some actual 25-45# limbs installed.

 

[jeffrm20]

Lower poundage power limbs originate from the 50/70 power limbs no matter where you get them. They are shaved down to lower poundage.

I have a set on my H500 that I just sold and they worked great. Joe does an awesome job, quick turn around time

 

[AllOut]

We just back the limb bolts out...
I have a BE and some screamers now that way and just got rid of a LF and a BEII and it was the same. Plus I've also done it with a strike. All 70# bows with the limb bolts backed out to 30-35lbs
Never had or seen anyone have a problem with it, just need to adjust the timing a little.

 

[jeffrm20]

We just back the limb bolts out...
I have a BE and some screamers now that way and just got rid of a LF and a BEII and it was the same. Plus I've also done it with a strike. All 70# bows with the limb bolts backed out to 30-35lbs
Never had or seen anyone have a problem with it, just need to adjust the timing a little.

Its not safe to lower a high poundage bow that low. Yoke and power cables will have too much slack in them causing them to pop off track, which could result in injury

 

[matt33]

well i don't need all that poundage and i would really like to get it down to 25 even 20 if possible.. i shoot 23 on a discovery and it's more than plenty i'd rather send it in to him and have him just shave the poundage down... but what about the mods for the let off? are these available for the strike eagle? i want the let off as close to 0 as i can get it

 

[Bob_Esper]

you can shave off a few pounds. . . like ten or so, by having a slot milled into the middle of em. just a thought

 

[matt33]

I'm just gonna send it in and have them shaved down I just wanna kno about the mods.. is there any for the let off for a strike eagle and if so how low can I get it?

 

[gvdocholiday]

Would be cheaper to have some longer cables made. Plus you'd still have the durability of the thicker limbs.

 

[American Eagle]

i just bought an oneida strike eagle 60-70lbs off of ebay for $110 and i was wondering how u go about getting the poundage lowered to like 25-45 and do they make modules for the strike eagles to where u can change the let off also

We can grind your limbs for you or sell you custom power cables. Either way your bow will shoot fine. If your strike eagle has modules in the cams you can swap the modules out for different lett offs. We also stock the parts for your bow.