The muzzy will fit on the long barbs they are just shorter.

 

The Cajun is threaded deeper into the tip than the muzzy.

 

I'd have to check but I could have sworn that muzzys don't work on cajun tips the threads the same size but muzzys don't thread on far enough. Maybe i'm wrong or i just have some old tips.

 

Muzzy's dont fit Cajuns because they arent threaded deep enough

 

Thanks guys that's what I needed to know!! Just wish the local store sold the Cajuns. Owell plenty of sponsors on here to order from.

 

The AMS Cyclone tips are the same thread as the other two, but will fit the same as the Cajun, so the Cajun and AMS are interchangeable, but the Muzzy tips aren't because they are a thread short from screwing all the way down.

 

Did anyone say that the muzzy tips threads are to short...

 

Lol maybe i had it backwards just grind you threads down a little if ya need tips that bad.

 

Dang hacksaw why the heck didn't I think of just grinding the threads down. Something so simple and I make it way to complicated.

 

Sometimes the simplest things are the hardest to see .

 

Just dont get yourself a sharp edge on your threads, cause if you hit a rock, you will probably be taking that tip off with pliers every time. It is a good idea but just make sure you do a good job so it doesnt mess the tip up

 

Thanks for the info Hoythntr69. Looks like Im going to be ordering some some complete points after today. Broke 3 right at the hole where the barbs go through. Yes I was shooting in some rocky stuff and they were all about 3 years old. So I guess replacement tips are the least of my worries now lol.