What kind do i want and does anyone have a website for where to get it
What kind of throttle cable
Knutson
1 - 12 of 12 Posts
Joined
·
52 Posts
Throttle cable I'm using for my 20 Hp Honda is called a Vernier cable....35ft. long.
http://www.truckntow.com/pc-11450-147092-venier-hd-adjustable-throttle-locking-control-cable-15.aspx
![Image]()
~~~~~~~~~
http://www.truckntow.com/pc-11450-147092-venier-hd-adjustable-throttle-locking-control-cable-15.aspx
~~~~~~~~~
Joined
·
1,612 Posts
Throttle cable I'm using for my 20 Hp Honda is called a Vernier cable....35ft. long.
http://www.truckntow.com/pc-11450-147092-venier-hd-adjustable-throttle-locking-control-cable-15.aspx![Image]()
~~~~~~~~~
Its not the safest to have a throttle that is locked and won't go back to idle in the event you fall over the boat.
Just rig up a foot or hand throttle with a 3 series (10x32) push pull cable. They are extremely tough and reliable. Thats what I use on the throttle and shifter for every kicker setup I do.
Joined
·
1,612 Posts
I get my cables made locally. You can find them on the internet though. Just search for Moorse cables or Teleflex cables. You will want a 3 series or a 30 series which will have 10x32 threads. You can get one with threads on both ends.
Joined
·
52 Posts
Heck....that cable is my "CRUISE CONTROL".....Set the speed and then its hands free until I slap the red knob and it immediately goes to slowest idle....Works great.
And....No way would I ever fall "over" this boat...
~~~~~~~~
Joined
·
3,980 Posts
Good looking boat but wheres your fan shroud? Looks dangerous!Heck....that cable is my "CRUISE CONTROL".....Set the speed and then its hands free until I slap the red knob and it immediately goes to slowest idle....Works great.
And....No way would I ever fall "over" this boat...
![Image]()
![Image]()
~~~~~~~~
Joined
·
6,697 Posts
How high are your rails?
Joined
·
52 Posts
<P><P>
I have run my older boat, the one before this one, like that with no fan shroud for over 20 years...no problems. Just got to stay away from low hanging limbs and branches....which there are very few of where I use the boat. In fact, it unusual to see a flounder gigging boat here on the Texas coast that has a shroud.<P><P>
<P><P>34 inches on the rail....keeps me from falling out...!<P><P>..
Joined
·
18 Posts
i used teleflex, and have had good luck with it http://www.go2marine.com/product.do?no=88803F
1 - 12 of 12 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
