[chance]

I know if I buy leds they will have a negative and positive wire but after that I'm lost never done any wireing help me out here how would I wire 7 27w led lights to a battery

 

[lightemup]

Use the search function at the top right of the page. You'll find several hundred threads with every question imaginable answered by knowledgable folk. Happy reading

 

[Buckmark311]

are the wire colors blue, green and brown?

 

[jb-hunter]

So I thought I posted a nice wiring diagram one time, I just spent 10 minutes looking through a ton of my old posts and all I found was... Damn, I have sold a lot of bows on here.

 

[Archer0545]

Theres a whole lighting sub forum on here. I found a lot of good info on there.

 

[jb-hunter]

Very simple version.

Note - 27W LEDs pull about 2 amps each, I have five per switch (that's 10A) and a switch rated at 15A.

16 ga wiring from each light home run to switch panel, all Grounds tied together inside the panel, all positive wires tie to one side of the switch and Battery ties to the other.

Depending on total number of lights and total number of amps, your battery feed to your switch box will likely need to be minimum 10 ga, most run 6 ga I believe.

Search and read... Good Luck