I need to know where to get some polymer for a fan boat. What kind and is it the same stuff they use in dump truck beds.
Polymer Bottom
SwampyBottoms
1 - 14 of 14 Posts
Joined
·
785 Posts
I need to know where to get some polymer for a fan boat. What kind and is it the same stuff they use in dump truck beds.
Joined
·
542 Posts
i would contact Ty Fulmer, chevyscoot...he can probably help you out.
Joined
·
785 Posts
One more question how thick should I go.
G
Guest
·yes, thats all you will need. As long as you dont hit anything at speed with your outboard, 1/4'' will last plenty long enough, the standard grade black will also be all you need too. Tooling along at fan speeds wont do too much damage to the poly, plus you probably wont be running too much dry ground either. LOL
Joined
·
785 Posts
Thats what I needeD to know. Kinda hard to find out stuff on a fan
Joined
·
489 Posts
I have it on my 1860 gator-tail....pounded it off rocks and logs and mud for a while now....no problem!
Joined
·
785 Posts
We are headed to F & F next week to place an order. Already got the fan and lights just need a hull!
Joined
·
540 Posts
I will 2nd horn plastics...http://www.superslide.com/ I would not go less than 1/4" just to give the screws something to hold.
Really should give it a lot of thought to see if the weight gains will reaelly be work it. I havent seen a fanboat than can run dry yet.
Really should give it a lot of thought to see if the weight gains will reaelly be work it. I havent seen a fanboat than can run dry yet.
Joined
·
36 Posts
How much would it cost to put down polymer on a 1760 fan boat?
Joined
·
12,040 Posts
Do it you're self...less then $900...pay someone i was quoted several thousand for a 18x8
Joined
·
36 Posts
That is not to bad.
I think With some help of a few buddies I believe I could get it done in a few days
I think With some help of a few buddies I believe I could get it done in a few days
1 - 14 of 14 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
