[waldo320]

Problem number one the two 400 watt hps lights that work flicker almost like a strobe light. Tonight was a test night on dry ground.

Problem two one of the lights is not working. I double checked all the wiring and nothing is loose. On my bench test it worked fine. I put a volt meter on the out puts and the watts start at 60 then slowly drop?

Thanks for the help. I hope to get the boat on Sunday night so any help would be most appreciated!

 

[Skin and scales]

Do u have to a generator or house outlet

 

[waldo320]

The flicker problem was on the genny. The one light not working was on both generator and house.

 

[waldo320]

Another weird thing I noticed as soon as I plug the feed in I hear the coil buzzing for this light? It does not matter if my switch is in the on or off side. Also I know it is a good bulb.

 

[Skin and scales]

Check your igniter n make sure it's good or take a warm bulb and stick in the one that's not working n see if it works then