http://www.controllking.com/

 

Supposedly people on here have it, but I haven't seen any pics of the set ups??

 

I run power tran steering with control king throttle. It is the way to go

 

You have good luck with the powertran? Im trying to figure out the differeces in that vs the panther T4.

 

I run power tran steering with control king throttle. It is the way to go

Let's see your setup...

 

Yeah, If you could post some pictures that would be awesome! Thanks.

 

I agree!! I wanna see how people set these up, but still no pics! I saw on a video thet take 4 seconds to turn from full left to full right, which isn't bad, but not great either. I wanna use my boat for walleye trolling, this is the main reason I wanna go this route, but wanna see one set up before I spend the coin! And besides, a shifter cable will still be needed, someone post up some pics or video!!!!

 

This looks to a lot faster than 4 sec lock to lock...

 

Where'd ya go Whitie...

 

Marine tech makes a corded version called a TrollMaster Pro3 this seems like the best option i've seen yet.

 

 

Yes, the marine tech in conjunction with the troll master gives you the ability to use one remote box that controls steering and throttle.

 

I will get pictures Tomorow. Power tran is 4x faster then panther. I sent the panther back to cabelas. It takes about 1 second exactly to go from full lest to full right. It works perfect. Flawless

 

Cool! Look forward to seeing your setup!

 

I am curious about this option also. When I started researching kicker setups I noticed everyone on here goes the custom cable stick steer route. If custom cables are $500, by the time you build the steering mechanism and all the custom fab time, you'd be ahead of the game getting one of these setups. Less stuff on your deck too.

 

I just dont want a stick on the front deck, we run three people up front and it would be in the way.

 

The video in the post above of the 2 guys fishing is cool, but it doest have alot of steering travel (left to right and right to left) from what i see...jmo

 

I have a piece of 2" Alluminum pipe coming out of the deck. I built a 6" box on top. I have a steering remote and throttle remote mounted in top. Jack plate controls on side and ignition and tilt on back. I also have a wireless steering remote I keep attached to a belt loop. It travels as far as the motor will turn. I can turn very sharp. And yea I had the panther t4. Nothing compares to the powertran

 

Sounds like you have it all!! Lookin forward to your pics.
From what I saw on their site you have to have a tube steer for their units??

 

i have the pictures saved to my computer now. i can email or txt to someone. the website will not allow me to load them on.

 

 

upload them to photobucket and use that to post your photos. Works like a charm

 

nevermind. saw where you sent them to carpdigger

 

I would love to see an actual video of the power tran turning back n forth. I wanted the panther just for the reason of having only one remote, now I'm not so sure?? I wanna get the stuff ordered this week, someone post up some video................PLEASE lol!!! Thanks for the pics btw, love the set up

 

Hey im with ya there. Even if you go with the Panther setup (trollmaster pro 3) and you wan to run wireless steering u need two seperate controls. The control that has both steering and throttle (panther) is corded. The power tran in conbination with the controllking seems to be the way to go from what i am hearing and seeing from these guys.

Wesley,

Do you use the tilt/trim jackplate very often?

 

Also, what kicker bracket you running Stokes?

 

Bobs machine 14" hydronic jack plate. U only need one remote. It just comes with the wireless in case. I don't think you will be happy with the panther

 

Yes. Every time we come across a stump I just hack it up. Never hit a stump. Plus we can adjust the motor height with the amount of weight on the front deck. It really is a good setup.

 

DO you have a part# or model # for that plate? Im on their site and cant find the 14"

 

I see they have wireless jackplate controls too.

 

http://www.bobsmachine.com/products/jackplate_kicker.cfm

 

I see you have the plate that hangs out away quit a bit, are there advantages of going with that style vs the straght up dn plate?

 

Stokes, am i the only one you didnt send pics too.....lol...i kid.

 

I sent them to him and he posted. Give me a few minutes to get home and I'll send them to you

 

Its all good... i saw them. carpdiger put em up...i been wondering if anybody ever got the hydraulic plate from bobs shop....you like it?