[afflicted]

More blades more speed. Less blades more low end ass. 3 blade is the middle man. Best of both worlds.

I don't really know exactly how it all works. But I know of some1 goin from a 3 to a 4 blade on a built 572 and if I'm not mistaken, he lost 7 mph

 

[R.Layne]

I don't really know exactly how it all works. But I know of some1 tgoin from a 3 to a 4 blade on a built 572 and if I'm not mistaken, he lost 7 mph

thats big loss was there low ebd difference?

 

[SpencerSS]

Nice boat. Performance?

 

[Bad Company]

where i screwed up on mine was i was in such a hurry to get it on the water i never checked for dents in the bottom of the hull......lay a straight edge on the bottom find them dents yank the motor out and fix them! save you alot of headache!!!

 

[Bad Company]

and add skirts on that cage!!!

 

[Bad Company]

im no guroo on that subject but i think there some low end tq and high end diffrencese between the 2 blade and 3 blade im sure im wrong but thats my guess

i had a 3 blade whisper tip 2.0 78" 42 mph wot ran dry only when i had it wide open
then got a master blaster super wide 80" 2 blade....38 mph wot could run dry with three people and a full tank @ 4 grand

 

[Bad Company]

im im not imstaken it allmost same hull as dustins correct me if im wrong?

if your talking about my boat...yea pretty much

 

[Joe Nichols]

No dents in the bottom of that rig. When it was first built it would run 55 mph. After some scratches on the poly it dropped a bit. Would run dry. Had 1900 some odd pounds in it one day got it on plane in shallow water. I didn't want to set it down in deep water though. Pushed us to the boat ramp the next day with a little over 2000 pounds. Good little rig. I would prolly ditch the genny and hps and go all LED. That boat is very weight sensitive. When you get used to it you will like it.

 

[R.Layne]

sorry for not.replying b km sooner guys i plan on led had it up to 45 so far and still.getting used to it i put it in the hay feild at the house thick hay it moved some but not as well as i thought but i.ran in skinny water the other night and did some.slideing around.and was well pleased

 

[R.Layne]

Nice boat. Performance?

love it comes out of the hole great starts up.soon as you hit the key cold hot it dont matter

 

[R.Layne]

and add skirts on that cage!!!

what
exatly you.talking about i have an idea but not sure

 

[R.Layne]

sorry.for.all the type O and chit i can't work this smart phone with my bigfingers

 

[R.Layne]

ttt

 

[hunter]

Nice boat !! Be careful !!

 

[R.Layne]

Nice boat !! Be careful !!

thanks im proud of her but Joe did the hard work to her i can't take credit for that and i. like the looks of your airranger

 

[Greenway]

what
exatly you.talking about i have an idea but not sure

Talking about bat wings or skirts what every you want to call them. The part of the cage that goes down to the floor to prevent chit from sliding into the prop

 

[R.Layne]

thats what i thought i wasnt sure though

 

[dblbanded]

Have u taken it dry?

 

[R.Layne]

i played in the snow the other day at the farm

 

[dblbanded]

i played in the snow the other day at the farm

Figured u had